Load data for .219 Donaldson Wasp + .224 | 53gr | Barnes TAC-X

Recommended Powder(s): Alliant AR-Comp

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.224 \| 53gr \| Barnes TAC-X
Manufacturer SKU:	30155
Bullet Weight:	53gr \| 3.4g
Bullet Diameter:	0.224" \| 5.69mm
Bullet Length:	0.778" \| 19.8mm
Caliber:	.219 Donaldson Wasp load data
Case Length (l3):	1.810" \| 46.0mm
Cartridge Length (C.O.L.):	2.177" \| 55.3mm
Seated Depth:	0.411" \| 10.4mm
Shank Seated Depth:	0.411" \| 10.4mm
Case Capacity:	35.1 Grains of Water \| 2.28 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	40988 psi \| 2826 bar
LID:	LID_B459_C105
Last updated:	2025-02-02

Load data for 44 loads in caliber .219 Donaldson Wasp with .224 | 53gr | Barnes TAC-X bullet and 22 powders such as Alliant AR-Comp. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate 2015	<<locked>>	84%	35853	87%	**49	98%
Accurate 2495	<<locked>>	90%	36709	90%	**54	98%
[Accurate 2520]*	<<locked>>	88%	36158	88%	**12	94%
Accurate 4064	<<locked>>	94%	35549	87%	**09	95%
Alliant AR-Comp 👍	<<locked>>	88%	35665	87%	**41	99%
[Hodgdon Benchmark]*	<<locked>>	83%	35897	88%	**97	92%
Hodgdon H322	<<locked>>	85%	36216	88%	**99	96%
Hodgdon TrailBoss	<<locked>>	95%	30298	74%	**28	100%
IMR 3031	<<locked>>	92%	36013	88%	**54	96%
[Lovex D073.6]*	<<locked>>	91%	36724	90%	**22	94%
[Norma 202]*	<<locked>>	89%	36361	89%	**92	94%
ReloadSwiss RS 14	<<locked>>	94%	30124	73%	**73	100%
[Rottweil R 901]*	<<locked>>	86%	36796	90%	**63	94%
[SNPE Vectan Tubal 3000]*	<<locked>>	87%	36695	90%	**07	94%
SNPE Vectan Tubal 5000	<<locked>>	94%	36564	89%	**10	96%
[Shooters World Match Rifle]*	<<locked>>	91%	36724	90%	**22	94%
Somchem S335	<<locked>>	88%	36883	90%	**30	96%
Vihtavuori N130	<<locked>>	83%	36463	89%	**27	98%
Vihtavuori N133	<<locked>>	89%	35998	88%	**27	97%
Vihtavuori N135	<<locked>>	96%	34171	83%	**46	96%
Vihtavuori N140	<<locked>>	91%	36100	88%	**59	95%
[Vihtavuori N540]*	<<locked>>	91%	35679	87%	**72	94%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate 2015	<<locked>>	81%	33388	81%	**87	97%
[Accurate 2495]*	<<locked>>	81%	27398	67%	**92	94%
[Accurate 2520]*	<<locked>>	83%	30081	73%	**38	90%
[Accurate 4064]*	<<locked>>	86%	26643	65%	**46	90%
Alliant AR-Comp	<<locked>>	81%	28950	71%	**41	97%
[Hodgdon Benchmark]*	<<locked>>	81%	33779	82%	**38	90%
[Hodgdon H322]*	<<locked>>	81%	32605	80%	**94	94%
Hodgdon TrailBoss	<<locked>>	82%	24860	61%	**90	100%
[IMR 3031]*	<<locked>>	81%	25454	62%	**03	90%
[Lovex D073.6]*	<<locked>>	84%	29544	72%	**25	90%
[Norma 202]*	<<locked>>	81%	28500	70%	**62	90%
ReloadSwiss RS 14	<<locked>>	82%	24787	60%	**32	100%
[Rottweil R 901]*	<<locked>>	81%	32358	79%	**41	92%
[SNPE Vectan Tubal 3000]*	<<locked>>	81%	30690	75%	**40	92%
[SNPE Vectan Tubal 5000]*	<<locked>>	82%	25933	63%	**05	90%
[Shooters World Match Rifle]*	<<locked>>	84%	29544	72%	**25	90%
[Somchem S335]*	<<locked>>	81%	30211	74%	**53	93%
Vihtavuori N130	<<locked>>	81%	33866	83%	**58	97%
[Vihtavuori N133]*	<<locked>>	81%	28152	69%	**00	94%
[Vihtavuori N135]*	<<locked>>	85%	24178	59%	**28	91%
[Vihtavuori N140]*	<<locked>>	82%	27369	67%	**97	90%
[Vihtavuori N540]*	<<locked>>	84%	29356	72%	**82	91%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data